Dispatchers taking calls and tracking loads in a trucking company office

Detention billing

How to bill detention: from the dock to a paid detention invoice

Prashant Chandra · Published

To bill detention, you need four things to line up, and a detention invoice is only the last of them:

  • Before the load, the free time, the hourly rate and the notice rule are written on the rate confirmation.
  • At the dock, the broker gets notice before free time runs out, often 30 minutes before (TQL and Arrive Logistics both ask for this), and the driver leaves with in and out times on the signed BOL or POD.
  • After the stop, the claim goes in inside the broker's window. RXO asks within 24 hours of pickup; Arrive wants paperwork within 2 business days of delivery.
  • Then someone follows it until it is paid. In ATRI's 2024 survey, carriers invoiced 75 percent of detention and 55 percent of those invoices were paid.

How to bill detention: the short version

Billing detention is a short job done at five busy moments. Most lost claims fail at one of those moments, not because the wait was not real. If you want the basics first, start with how detention pay works: free time, rates, and what counts as detention. This post goes one level deeper, into the billing.

  1. Get the terms on the rate con. Free time, hourly rate, cap, when the clock starts, and how to give notice.
  2. Give notice before free time ends. In writing, so there is a time stamp.
  3. Get the times signed. In and out times on the BOL or POD, signed by the facility.
  4. Send the claim inside the window. With the paperwork attached, in the format the broker asks for.
  5. Follow it to payment. Keep it on a list until the money arrives.

What must be on the rate confirmation before you bill?

The rate confirmation is the contract for that load. In Canada, no rule sets free time or detention rates, so if the rate con says nothing, you have little to stand on. Read these lines before the truck rolls:

  • Free time. How many hours at each stop before detention starts. In ATRI's survey, 67 percent of carriers that charge detention start at 2 hours.

  • When the clock starts. From arrival, or from the appointment time. Arrive's terms start detention 2 hours after the scheduled appointment, and only if the driver was on time.

  • The hourly rate and any cap. The rate is what you bill, whatever the market says.

  • The notice rule. How and when the broker wants to hear about a wait.

  • Where the claim goes. On the load invoice, a separate email, or a request in the broker's carrier portal.

If a line is missing, ask for it in writing before dispatch. A two-minute email now saves a claim that cannot be paid later.

How do you give notice before free time ends?

Most brokers will not pay detention they did not know about. Several publish exactly when they want to hear from you:

  • TQL asks carriers to contact it on arrival and departure at every shipper and receiver, and again 30 minutes before detention begins. Call, text or email all work.
  • Arrive Logistics says carriers must notify it no later than 30 minutes before going into detention, at the shipper and the receiver.

Put the notice in writing, even after a phone call. A text or email has a time stamp. A phone call does not, unless someone writes it down. A short message is enough: the load number, the facility, the appointment time, the arrival time, and "still waiting, free time ends at [time]."

If the driver is busy at the dock, the office can send the notice, as long as the driver has sent the arrival time first.

What proof do brokers want for a detention claim?

The proof is almost always the same: in and out times, written on paperwork the facility signed. Here is what four brokers publish:

What proof do brokers want for a detention claim?
BrokerProof they ask forDeadline they publish
TQLCheck-in and check-out times on the paperwork; if the facility will not write them, tell TQL before leavingNot stated on its FAQ
Arrive LogisticsSigned BOL and/or POD with both in and out timesSigned documents within 2 business days of delivery
RXOOn-time arrival and a signed BOL with in and out timesRequest within 24 hours of pickup
C.H. RobinsonArrival and departure times as they appear on the paperwork, plus the document that proves themNot stated in its guide

C.H. Robinson's guide is blunt about the most common failure: if the times you enter "don't match what's on the paperwork, it will not pass validation," and the request goes to a person to approve or reject. So copy the times from the signed paper, not from memory or a text message. A photo of the signed BOL taken before the driver leaves is the best proof you can have.

What is a detention form, and who fills it in?

"Detention form" means two different things, and you may need both.

The facility's record. Some shippers and receivers have a sign-in sheet or a stamp for in and out times. If they will, ask them to write the times right on the BOL. That is the proof the broker wants.

Your own record. This is a short form your office keeps for each wait: load number, facility, appointment, arrival, notice sent, departure, who signed. The driver texts the times; the office fills in the rest. ATRI found that most carriers do not track the time lost at each stop. Without your own record, it is hard to know which waits you never billed.

Some brokers also have their own request form, often inside their carrier portal. C.H. Robinson's guide, for example, asks you to pick the stop, enter the times from the paperwork, and attach the document that proves them.

How do you work out the detention amount?

The amount comes from the rate confirmation, not from a guess. The arithmetic is:

Billable time = time at the facility − free time, counted from the start rule on the rate con.

Detention = billable time × the hourly rate on the rate con, up to any cap.

Watch the start rule. If the rate con counts from the appointment, an early arrival does not add billable time. Also check how the rate con rounds: to the quarter hour, the half hour or the full hour.

Example, made-up times: The appointment is 8:00. The driver arrives at 7:45, on time. Free time is 2 hours, counted from the appointment, so detention starts at 10:00. The truck leaves at 12:30. Billable time is 12:30 − 10:00 = 2.5 hours. The claim is 2.5 × the hourly rate on the rate con.

The detention calculator does this sum with your free time and your rate, and adds a lumper fee if there was one.

What goes on a detention invoice?

Some brokers want detention as a line on the load invoice. Others want a separate detention invoice or a portal request. Either way, the broker should be able to check it without asking you a single question. Put the paperwork behind every line.

sample

Detention invoice · sample (fields only)

Load number and broker reference: as on the rate con
Facility, city and stop type: pickup or delivery
Appointment time and arrival time
Notice sent: date, time and how
Departure time: as on the signed BOL or POD
Free time and start rule: as on the rate con
Billable hours × hourly rate = detention total
Lumper fee, if any: amount on the receipt
Attached: signed BOL or POD, notice message, lumper receipt

If a lumper was used on the same stop, bill it on the same invoice with the receipt. Our post on who pays a lumper fee covers the receipt and the deadline.

When is a detention claim due?

  1. At the dock

    Notice before free time ends. TQL and Arrive ask for 30 minutes' notice.

  2. Leaving

    Times signed on the BOL or POD, and a photo of it sent to the office.

  3. Within 24 hours

    RXO's window, counted from pickup.

  4. Within 2 business days

    Arrive's window for signed documents, counted from delivery.

  5. After the window

    Many claims are refused, however long the wait was.

Every broker sets its own deadline, in its carrier guide or on the rate con. The safe habit is to send the claim the same day the truck leaves the dock.

How do you follow up until detention is paid?

Sending the claim is not the end. In ATRI's 2024 survey of US carriers, carriers invoiced detention 75 percent of the time, and 55 percent of those invoices were paid. That works out to about 41 percent of detention events paid (0.75 × 0.55). In a 2016 DAT survey, only 3 percent of carriers said they were paid on 90 percent or more of their claims, and two-thirds of brokers said they pay detention only when they collect it from the shipper or receiver.

So keep each claim on a list with the date sent, and check it when the load is paid:

  • Paid in full: close it.
  • Short-paid or missing: reply on the same email thread with the signed BOL, the notice message and the rate con line.
  • Refused: ask for the reason in writing. A missed notice or a mismatch in times is worth knowing for next time.

ATRI also found that truckload carriers did not bill detention at all in a median 21 percent of incidents. A claim that is never sent is the only kind that is never paid.

Who in your office should own detention billing?

Detention billing fails when it belongs to nobody. The driver knows the times. Dispatch knows the rate con. Billing sends the invoice. Each step is small, but each one happens at a busy moment.

Give one person the list. Their job: check the rate con before dispatch, make sure notice went out, collect the signed paperwork the same day, send the claim, and follow it until it is paid.

That is the part of detention and lumper fees we set up for carriers: times and paperwork collected from drivers by text, the claim drafted the same day, and a person on your side sending it and following up.

Questions about billing detention

How do I bill a broker for detention?
Check the free time and rate on the rate confirmation, give notice before free time ends, get in and out times signed on the BOL or POD, and send the claim with that paperwork inside the broker's deadline.
What is a detention invoice?
An invoice, or a line on the load invoice, that bills the broker for waiting time past the free time. It shows the times, the free time, the billable hours, the rate and the total, with the signed paperwork attached.
Can I bill detention if it is not on the rate confirmation?
You can ask, but you have little to stand on. In Canada no rule sets free time or detention rates, so the rate confirmation is the contract. Get the terms in writing before dispatch.
How long do I have to submit a detention claim?
Each broker sets its own window. RXO asks within 24 hours of pickup. Arrive Logistics wants signed documents within 2 business days of delivery. Send it the same day to be safe.
When should I notify the broker about detention?
Before free time runs out. TQL and Arrive Logistics both ask for notice 30 minutes before detention begins. Send it in writing so it has a time stamp.
What proof do I need for detention pay?
In and out times written on the BOL or POD and signed by the facility. C.H. Robinson's guide says a request whose times do not match the paperwork will not pass validation.
What if the facility will not write the times on the BOL?
Tell the broker before the driver leaves. TQL's FAQ asks for exactly that. Then send the times the driver recorded, with your notice message.
How do I work out how much detention to bill?
Take the time at the facility, take off the free time using the rate con's start rule, and multiply the billable hours by the hourly rate on the rate con, up to any cap.
Does detention time count against hours of service?
Yes. Under the federal Hours of Service Regulations, waiting while a truck is loaded or unloaded is on-duty time.
Why do so many detention claims go unpaid?
Missed notice, unsigned times, late claims and no follow-up. In ATRI's 2024 survey, carriers invoiced 75 percent of detention and 55 percent of those invoices were paid.

Sources

Detention pay and lumper feesDetention calculatorLumper fee: who pays it and how you get it backProof of delivery in truckingBill of lading: what Ontario requiresAfter-hours dispatch: what it covers and what it costsTONU: truck ordered not usedAccessorial charges in truckingLumper receipt: what it must show

Get every detention claim billed and followed up, free check

(888) 800-8123

We use it only to call you back about your request.

Last reviewed: November 2026. Facts checked November 16, 2026.